Corner Protection Hoop CPH Ideal For Warehousing - Galvanised 60mm Diameter

The Corner Protection Hoop provides protection for corners and other vulnerable areas on busy industrial sites.

Manufactured from mild steel and galvanised for longevity, the Corner Protection Hoop is highly durable.
Available in 500mm and 800mm heights they can be used to protect a wide range of locations from vehicles of different sizes.

Corner Protection Hoops are available in galvanised finish or galvanised & coated yellow, complete with black reflective bands (2 x 150mm width bands - 500mm high, 5 x bands - 800mm high).

On the 500mm above ground hoop the 2 reflective bands are on the horizontal arms

On the 800mm above ground hoop there are 2 reflective bands on the horizontal and 1 band on each of the three legs = 5 bands

** Installation**

For flanged ends, a suitable surface, preferably concrete should already exist for drilling into and bolting down. 12mm expanding anchor bolts are recommended:- 3 for each foot, therefore 9 bolts in total per hoop are required.

For ragged ends a concrete foundation approx. 300mm cube is recommended for each leg, depending on ground conditions.

• Sizes are approximate due to process of manufacture, tolerance within 4%

Corner Protection Hoop CPH